Desmel-manufacture,factory,supplier from China

(Total 24 Products for Desmel)
Products Description of DIMETHYL DICARBONATE CAS#4525-33-1Dimethyldicarbonate (DMDC), also known as Vigorin, is a fruit juice beverage preservative permitted for use in my country's food additives standards (INS No. 242). At room temperature or even low temperature, DMDC has a strong killing ability against many contaminating bacteria in fruit juice beverages. Its antiseptic effect is closely related to the modification and inactivation of key enzyme proteins in the bacteria by DMDC.
Kontaktieren Sie mich jetzt
Products Description of Sulfolane 99.5% CAS#126-33-0Sulfolane solvent has high solubility for aromatics, good selectivity, good thermal stability, low vapor pressure, low toxicity and no corrosion to carbon steel.
Kontaktieren Sie mich jetzt
Products Description of 1,8-Naphthalic anhydride CAS#81-84-5It precipitates needle-shaped crystals in ethanol and rhombus-shaped crystals in acetic acid.
Kontaktieren Sie mich jetzt
Methylcyclopentadienyl Manganese Tricarbonyl CAS# 12108-13-3Manganese, tricarbonyl methylcyclopentadienyl is a dark orange liquid. Faintly pleasant, herb-like odor. Molecular weight= 218.10;Boiling point=232℃; Freezing/Melting point=18℃; Flash point=74℃; 96℃. Hazard Identification (based on NFPA-704 M Rating System): Health 3, Flammability 0, Reactivity 0.
Kontaktieren Sie mich jetzt
Products Description of Thiotriazolin CAS#357172-63-5Colorless liquidFactory and Equipment ShowFast delivery timeInventory 2-3 working days New production 7-10 working days
Kontaktieren Sie mich jetzt
Products Description of Ferrous sulfate heptahydrate CAS37782-63-0The chemical formula of ferrous sulfate is FeSO4. The most common one is ferrous sulfate FeSO4·7H2O containing seven crystal waters, commonly known as green vitriol. Light blue-green monoclinic crystal, density 1.898g/cm3, melts in crystal water at 64℃. Soluble in water, the aqueous solution is acidic. Gradually weathered in the air, and oxidized to yellow-brown basic iron salt.
Kontaktieren Sie mich jetzt
Products Description of Boron Trifluoride Diethyl Etherate CAS#109-63-7Boron trifluoride is an important Lewis acid catalyst in organic synthesis and plays an important role in organic reactions (such as polymerization, hydrocarbonization, alkylation, isomerization, etc.). It is inconvenient to use trifluoride when it is in gaseous state. In order to adapt to the activity requirements of different reactions, according to the characteristics of trifluoride, it is often combined with polar oxygen- or nitrogen-containing compounds to convert it into a complex with strong stability.
Kontaktieren Sie mich jetzt
Products Description of O-Phenanthroline CAS#66-71-71,10-Phenanthroline monohydrate is an organic intermediate, white crystalline powder. It is a redox indicator, a reagent for the determination of ferrous iron, palladium, vanadium, copper, and iron.Monohydrate is a white crystalline powder.
Kontaktieren Sie mich jetzt
Products Description of 4,5-epoxytetrahydrophthalic acid diglycidylester CAS#25293-64-5Colorless liquid4,5-epoxytetrahydrophthalic acid diglycidylester Chemical PropertiesBoiling point 447.4±45.0 °C(Predicted)density 1.406Factory and Equipment ShowFast delivery timeInventory 2-3 working days New production 7-10 working days
Kontaktieren Sie mich jetzt
Products Description of Clavulanic acid CAS#58001-44-8Clavulanate Potassium, trade name potassium clavulanate, is an oxopenicillin β-lactamase inhibitor, which is a β-lactam ring and a hydrogenated isoxazole ring.
Kontaktieren Sie mich jetzt
Products Description of Oxalic Acid CAS#144-62-7Oxalic acid is an organic substance with the chemical formula H₂C₂O₄. It is a metabolite of organisms, a medium-strong acid, widely distributed in plants, animals and fungi, and plays different functions in different organisms. Studies have found that more than 100 plants are rich in oxalic acid, especially spinach, amaranth, beet, purslane, taro, sweet potato and rhubarb.
Kontaktieren Sie mich jetzt
Products Description of OXALIC ACID CAS#68603-87-2Oxalic acid standard solution is mostly used for quantitative detection of oxalic acid content in food and medicine. For example, oxalic acid standard solution can be used to determine the oxalic acid content in edible mushroom broth.
Kontaktieren Sie mich jetzt
Products Description of 3-MERCAPTOPROPIONIC ACID CAS#107-96-03-Thiopropionic acid is a direct raw material in organic chemicals and is used in pharmaceutical intermediates and electronic chemicals; it is used as an intermediate in the pharmaceutical Fenal, and it is also used as a stabilizer for polyvinyl chloride.
Kontaktieren Sie mich jetzt
Products Description of Boric acid CAS#11113-50-1Boric acid is also called "orthoboric acid". It is derived from the interaction between natural borax (sodium borate) and acid. Soluble in water, ethanol and glycerin. The aqueous solution is acidic and is a monovalent weak acid. Solubility in water increases with temperature. Heated to 169℃ (±1℃), dehydration will produce metaboric acid, and 300℃ will form boric anhydride. Neutralize with strong base to obtain metaborate.
Kontaktieren Sie mich jetzt
Products Description of  Trimesic acid CAS#554-95-0Trisproic acid is in the form of white to slightly yellow crystalline powder. Solubility: easily soluble in ethanol, soluble in ether, and soluble in 40 parts of water at 23°C.
Kontaktieren Sie mich jetzt
Products Description of DL-Mandelic acid 99% CAS#90-64-2Mandelic acid is a large molecular weight fruit acid that is lipophilic. Compared with the common fruit acid-glycolic acid, mandelic acid has certain antibacterial ability. At the same time, compared with common glycolic acid and lactic acid, its penetration rate into Chemicalbook skin will be slower, which means that it is less irritating than glycolic acid. Its fat solubility is increased and the ability of stratum corneum to penetrate the skin is improved.
Kontaktieren Sie mich jetzt
Products Description of Octanoic acid CAS#124-07-2Caprylic acid is a medium-chain fatty acid. It has 8 carbons in its chain, so it is also called n-caprylic acid. Caprylic acid is considered an essential fatty acid, which is necessary for the proper functioning of the human body.
Kontaktieren Sie mich jetzt
Products Description of 2,5-Furandicarboxylic acid CAS#3238-40-22,5-Furandicarboxylic acid is a derivative of furan. This organic compound was first obtained by Fittig and Heinzelmann in 1876. 2,5-Furandicarboxylic acid is a chemical intermediate with strong sensitivity and good stability. It is soluble in water under alkaline conditions and is a white powdery solid under acidic conditions. It is an important monomer for the preparation of corrosion-resistant plastics.
Kontaktieren Sie mich jetzt
Products Description of Metatitanic acid CAS#12026-28-7Titanic acid is an intermediate product of the sulfuric acid method for producing titanium dioxide.
Kontaktieren Sie mich jetzt
Products Description of 2,4-Dichlorophenoxyacetic acid CAS#94-75-7White crystals. Melting point 138℃, boiling point 160℃ (53Pa). Soluble in organic solvents such as ethanol, acetone, ether and benzene, insoluble in water.
Kontaktieren Sie mich jetzt
Products Description of Pyrophosphoric acid CAS#2466-09-3Pyrophosphoric acid is a colorless needle-shaped crystal or a colorless viscous liquid. It forms crystals after long-term storage and is colorless glassy. Pyrophosphate has strong coordination properties. Excess P2O74- can dissolve insoluble pyrophosphates (Cu2+, Ag+, Zn2+, Mg2+, Ca2+, Sn2+, etc.) to form complex ions, such as [Cu(P2O7)2]6-, [Sn(P2O7)2]6-, etc. It is often used as a catalyst in industry to prepare organic phosphates, etc. Pyrophosphate meets silver salt to obtain white silver pyrophosphate precipitate.
Kontaktieren Sie mich jetzt
Products Description of Kojic acid CAS#501-30-4Kojic acid, also known as kojic acid and kojic acid, is an organic acid with antibacterial effect produced by aerobic fermentation of glucose by Aspergillus candida at 30-32°C. Its molecular structure is a γ-pyrone with a substituent. Among the γ-pyrone compounds existing in nature, the only famous compounds are kojic acid and maltol. In 1907, Saito separated kojic acid crystals from rice koji. It was named by Yabuta in 1912 and its structure was determined in 1924.
Kontaktieren Sie mich jetzt
Products Description of 1,3,5-Benzenetricarboxylic acid chlorideCAS#4422-95-1White powder1,3,5-Benzenetricarboxylic acid chloride Chemical PropertiesMelting point 32-38 °C (lit.)Boiling point 180 °C/16 mmHg (lit.)density 1.487 g/mL at 25 °C (lit.)refractive index 1.5945-1.5965Fp >230 °Fstorage temp. Store below +30°C.solubility decomposesform Liquidcolor Clear colorless to slightly yellowWater Solubility decomposesSensitive Moisture SensitiveBRN 2940936CAS DataBase Reference4422-95-1(CAS DataBase Reference)NIST Chemistry
Kontaktieren Sie mich jetzt
Products Description of 2,3,4,5-Tetrafluorobenzoic Acid CAS#1201-31-62,3,4,5-Tetrafluorobenzoic acid is a chemical substance with the molecular formula C7H2F4O2.Colorless flaky crystals.
Kontaktieren Sie mich jetzt
Relate News
In the world of chemicals, Sodium Carbonate (CAS 497 - 19 - 8) continues to play a pivotal role across various industries. As a key chemical compound, it is drawing attention from manufacturers, suppliers, and end - users globally.Innovation in R&DLeading Sodium Carbonate manufacturers around the globe are constantly pushing the boundaries of innovation. Solvay, a renowned name in the chemical industry, is currently researching a more eco - friendly and efficient production process for Sodium Carbonate.
In terms of market conditions, the price trend and supply - demand relationship of ammonium sulfate have always attracted much attention. Since the beginning of this year, the ammonium sulfate market has been affected by a combination of various factors. During the spring ploughing and fertilization preparation period, the overall demand in the fertilizer market has fluctuated, and ammonium sulfate, as a type of nitrogen fertilizer, has also been implicated. Domestically, its price has experienced ups and downs.
For gemstones, amber is undoubtedly the most precious kind, and it is loved and sought after. However, the formation of amber takes a very long time. Therefore, it is not as simple as it looks on the surface. It also contains rich substances, which can be extracted and used in many aspects. It can also be made into various medicines with remarkable effect. It can be said that amber not only has a beautiful appearance, but also helps in medicine.Amber's Powerful Root - Succinic AcidSuccinic acid is a colorless crystal extracted from amber by scientists in the 15th century.
Hydroxyethylidene diphosphonic acid characteristics:HEDP(Hydroxyethylidene Diphosphonic Acid) is an organic phosphoric acid and corrosion inhibitor, which can form stable complexing agent with iron, copper, zinc and other metal ions, and can dissolve oxides on the metal surface. HEDP can still play a good role in corrosion and scale inhibition at 250°C, is still very stable at high pH values, not easy to be hydrolyzed, and not easy to decompose under general light and heat conditions.
New Use of Poly-L-lactic Acid as Shape Memory MaterialBackground techniqueBiopolymer is an important medical polymer material with good biodischarge and bioabsorbability advantages. It has been widely used in outdoor fixation, tissue engineering stents, operation lines, drug control, etc. Polylactic acid is usually synthesized by the ring polymerization method of lactide. According to the difference of optical ring-opening polymerization, the lactide properties are divided into D-lactide properties, L-lactide properties and DL-lactide properties.
The Introduction of DMAPDMAP is a well-known organic compound with the molecular formula C7H10N2. It is a white solid with a strong odor and is soluble in water, ethanol, and ether. DMAP is a widely used catalyst in organic synthesis due to its high reactivity and selectivity. In this article, we will discuss the properties, uses, and applications of DMAP in the chemical industry.The Properties and Uses of DMAPDMAP is a highly reactive catalyst that is commonly used in organic synthesis.
CAS#433711-95-6 IntroductionThe chemical compound (2-Bromo-pyridin-4-yl)carbamic acid tert-butyl ester, also known as CAS#433711-95-6, is a key intermediate in the synthesis of various pharmaceuticals and agrochemicals. This compound is widely used in the chemical industry due to its unique properties and versatile applications.
Introduction of Capsaicin PepperThe spicy ingredients contained in pepper fruit are capsaicin pepperoids, including: capsaicin pepper, dihydrocapsaicin pepper, nordihydrocapsaicin pepper, homocapsaicin pepper, homodihydrocapsaicin pepper I, homodihydrocapsaicin pepper II, Nonoyl vanillylamide, Decoyl vanillylamide, Capryl vanillylamide. Capsanthin includes Cryptoxanthin, Capsanthin, Capsorubin, Carotene; also contains vitamin C, citric acid, tartaric acid, malic acid, protein, minerals, etc. .
Table of Funny Chemistry StoriesOld new sealPure blue ink and blue-black inkFind a "coat" for the bookBallpoint pen or ballpoint penFour Color Ball StampsThe "natural enemy" of glassThe "Haunted" StoryNational football - our prideFlash in the darkReferenceSodium Propionate CAS 137-40-6Old new sealThere is a batch of ancient paintings that have become grayish yellow and dull, but the seals on them are bright red, like new ones.
In the chemical industry, dichloromethane (CAS#75 - 09 - 2), as a crucial organic compound, has always been the focus of the industry. Recently, the industry trends and regulatory policy adjustments of dichloromethane have triggered extensive discussions within the industry. The preparation methods of dichloromethane mainly include the methanol chlorination method and the chloromethane method. The methanol chlorination method involves the reaction of methanol and hydrogen chloride under the action of a catalyst to generate dichloromethane.
x

erfolgreich eingereicht

Wir werden uns so schnell wie möglich mit Ihnen in Verbindung setzen

Schließen